MOTOR gRADER
GR180
The motor grader is mainly used for ground leveling, ditching, slope scraping, bulldozing, scarification, snow removal for large areas such as highway, airports, farmlands etc., It is necessary construction machinery for national defense construction, mine construction, urban and rural road construction and water conservancy construction, farmland improvement and so on.
Machine Weight
15400 kg
Rated power
142 kW
Engine Type
6CTA8.3 – C190-II
Main Specifications
Basic Parameters | Parameter |
Engine Type | 6CTA8.3 – C190-II |
Rate power/speed | 142 kW/ 2200 rpm |
Machine Dimension (Standard) | 8900 x 2625 x 3420 mm |
Machine weight (Standard) | 15400 kg |
Tyre specification | 17.5 – 25 |
Ground clearance | 430 mm |
Tread | 2156 mm |
Axle distance between front and rear | 6219 mm |
Wheel base between middle and rear | 1538 mm |
Performance Parameters | Parameter |
Forward speed | 5, 8, 11, 19, 23, 38 km/h |
Rearward speed | 5, 11, 23 km/h |
Traction force f=0.75 | ≥79 kN |
Maximum gradeability | ≥25% |
Inflation pressure of tyre | 260 kPa |
Work system pressure | 16 MPa |
Transmission pressure | 1.3 – 1.8 Mpa |
Working Parameters | Parameter |
Maximum steering angle of front wheel | ±50° |
Allowable angle of inclination of front wheel | ±17° |
Maximum swinging angle of front axle | ±15° |
Maximum swinging angle of front axle | Front 15°, Rear 15° |
Maximum swinging angle of front axle | ±27° |
Minimum turning radius | 7.3 m |
Blade maximum lifting height | 450 mm |
Blade maximum scraping depth | 500 mm |
Blade maximum tilt angle | 90° |
Blade cutting angle | Front 20°, Back 70° |
Blade angle of revolution | 360° |
Length x Height | 3660 x 610 mm |
Oil Filling Amount | Parameter |
Coolant | 50 L |
Fuel tank | 280 L |
Engine | 24 L |
Transmission box | 38 L |
Balance box | 46 L |
Drive axle | 28 L |
Hydraulic oil | 110 L |
Built to move heaven and earth. Engineered to be an extension of its operator.
Location
18 and 20 Grader Road,
Spartan – Extension 3,
Johannesburg,
Gauteng,
1691